 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SD1834 Transistors Medium Power Transistor (60V, 1A) 2SD1834 Features 1) Darlington connection for high DC current gain (typically, DC current gain = 15000 at VCE = 3V, IC = 0.5A) 2) High input impedance. External dimensions (Unit : mm) MPT3 4.5 1.6 0.5 1.5 Circuit diagram C (1) (2) (3) 1.0 2.5 4.0 0.4 0.4 1.5 0.5 1.5 3.0 0.4 (1)Base B (2)Collector (3)Emitter B : Base C : Collector E : Emitter E Absolute maximum ratings (Ta=25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCES VEBO IC PC Tj Tstg Limits 60 60 7 1 2 0.5 2 150 Unit V V V A(DC) A(Pulse) 2 1 3 W -55 to +150 C C 1 Single pulse Pw=100ms 2 RBE=0 3 Mounted on a 40x40x t 0.7mm ceramic substrate Electrical characteristics (Ta=25C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current DC current transfer ratio Collector-emitter saturation voltage Transition frequency Output capacitance Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE VCE(sat) fT Cob Min. 60 60 7 - - 2000 - - - Typ. - - - - - - 0.9 150 7 Max. - - - 1 1 - 1.5 - - Unit V V V A A - V MHz pF Conditions IC=50A IC=100A , RBE=0 IE=50A VCB=60V VEB=6V VCE/IC=3V/500mA IC/IB=500mA/500A VCE=5V , IE= -10mA , f=100MHz VCE=10V , IE=0A , f=1MHz Measured using pulse current. Rev.A 1/2 2SD1834 Transistors Packaging specifications and hFE Type Package hFE Marking Code Basic ordering unit (pieces) Denotes hFE 2SD1834 MPT3 2k~ DE T100 1000 Electrical characteristics curves 0.5 COLLECTOR CURRENT : IC (A) Ta=25C PC=0.5W 1 COLLECTOR CURRENT : IC (A) 0.4 0.3 0.2 0.1 0.05 DC CURRENT GAIN : hFE 10A 9A 8A 7A 6A 5A 4A 3A Ta=25C VCE=3V 500k 200k 100k 50k 20k 10k 5k 2k 1k Ta=25C 0.5 0.2 VCE=5V 3V 0.1 2A 1A 0.02 0.01 0 IB=0A 0 1 2 3 4 5 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 COLLECTOR TO EMITTER VOLTAGE : VCE (V) BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR CURRENT : IC (A) Fig.1 Ground emitter output characteristics Fig.2 Ground emitter propagation characteristics Fig.3 DC current gain vs. collector current COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) 10 5 Ta=25C 50 20 10 5 COLLECTOR CURRENT : IC (A) Ta=25C f=1MHz IE=0A 2 Ic Max Pulse 1 0.5 DC Ic Max Pw s 0m s =1 m 00 =1 Pw 2 IC/IB=1000 1 0.5 500 0.2 0.1 Ta=25C 0.05 Single nonrepetitive pulse 2 1 0.5 0.5 1 2 5 10 20 50 100 COLLECTOR TO BASE VOLTAGE : VCB(V) 0.2 0.1 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2 COLLECTOR CURRENT : IC (A) 0.5 1 2 5 10 20 50 100 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.4 Collector-emitter saturation voltage vs. collector current Fig.5 Collector output capacitance vs. collector-base voltage Fig.6 Safe operating area Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of 2SD1834
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |